Page 30
Operating Manual E4-2800/4200/5200 / M4-3000/4000/5500
04/2014
6.3.5 Adjustment of wire feed speed / energy
Section
Adjustment of wire feed speed / energy
Fig. 6-13
Display for:
•
Welding current [A]
•
Plate thickness [mm]
•
Wire feed speed [mmin]
•
Current „Hold-value “
Rotary pushbutton for pre-set values:
Rotational function:
•
Selection of wire feed speed / energy
Push function for changing display (press for 3 sec)
•
Welding current [A]
•
Plate thickness [mm]
•
Wire feed speed [m/min]
By turning the rotary pushbutton (E) a wire feed speed / energy value can be selected as a
default value.
Alternatively, the expected welding current or plate thickness can be set as default value by
pressing the pushbutton.
At weld end, the current value achieved during welding is displayed (welding
current „hold-value “). In order to display the pre-set values, press the rotary
push-button / key .
E
8
E
