background image

 

E-15

 

3.  Turn on the unit and external audio device. 
4. Tap 

the 

MODE Button 

on main or remote control to select AUX mode, “AUX” icon turns on, 

display shows “AUH” message. 

5.  The volume level can now be controlled through the main unit. Operate all other functions on 

the auxiliary device as usual. 

Note:

 

‡

 

If you connect this unit to the Line-Out Jack of your external device then you only need to adjust 
the volume control of this unit. If you connect the Headphone Jack of your external device then 
you may need to adjust both the volume controls of your external device and this unit to obtain 
the desirable volume setting. 

‡

 

Press the 

 Button 

on main unit or remote control to turn off the unit when you have finished 

listening. Don't forget to switch off the power of your external device as well. 
 

PRESET EQ (REMOTE CONTROL ONLY) 

This unit provides 4 different EQ modes to enhance your listening experience. You can select the 

desired effect by pressing the 

EQ Button 

on remote control repeatedly at following sequence: 

ROCK 

¨

JAZZ 

¨

POP 

¨

CLASSIC 

¨

OFF

 

 

 

MUTE BUTTON (REMOTE CONTROL ONLY) 

‡

 

Press the 

MUTE

Button 

on remote control to mute the sound output from the speaker 

temporarily. The “L00” icon will appear in display and flashing. 

‡

 

Press the 

MUTE

Button 

again or 

VOL+/- buttons 

on remote control to resume to normal 

speaker playback. 

SLEEP OPERATIONS (REMOTE CONTROL ONLY) 

The sleep timer allows you to turn the unit off after a designated time is reached. 

1.  To activate the sleep timer, turn the unit on and tap the 

MODE button

 to select AM, FM radio, 

CD, Bluetooth or listening to music via AUX IN. 

2. Tap the 

SLEEP button

 on remote control, the sleep time icon “

” appears on the display. 

3. Repeatedly tap the 

SLEEP button

 to select a sleep time. The unit will turn off after 120, 90, 60, 

30, 20 or 10 minutes. Wait for 3 seconds after your selection for the unit to confirm the selection, 
the unit will play for the selected length of time then automatically turn off. 

4.  To cancel the sleep timer, tap the 

SLEEP button

 repeatedly until timer shows “OFF”, the sleep 

time icon 

 disappears on the display 

5.  To turn the unit off before the selected length of time, press the   

button

 at any time. 

Notes: 

1.) 

To check the remaining sleep time, tap the 

SLEEP button

 once. 

2.) 

If you are falling asleep to music from an external device connected to the AUX input, the 

sleep timer will shut off the power to this system but it will not turn off the external device. 

USING HEADPHONES (NOT INCLUDED) 

Inserting the plug of your headphones into the Stereo Headphone Jack will enable you to listen to 
the CD or Radio music in private. When using headphones, the Built-in Speakers will be 
disconnected.

 

READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES 

1. Avoid extended play at very high volume as it may impair your hearing. 

Summary of Contents for JBS-210





















Reviews: