E-9
NOTE:
Only use a well-known brand of battery to ensure the longest life and best
performance.
Battery Precautions
z
Replacement of batteries must be done by an adult.
z
The supply terminals are not to be short-circuited.
z
Non-rechargeable
batteries
are not to be recharged.
z
Exhausted batteries are to be removed.
z
Only batteries of the equivalent type are to be used.
z
Batteries are to be inserted with the correct polarity.
z
Dispose of batteries properly. Do not dispose of batteries in fire. The batteries
may explode or leak.
WARNING
!
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
The remote control supplied with this product contains a coin/button cell
battery. If the coin/button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep it away from
children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
NOTE ON NON-MAGNETICALLY SHIELDED SPEAKERS
This unit is not magnetically shielded and may cause color distortion on the screen of some TVs or
video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if
unnatural color shifts or image distortion occurs.
STANDBY MODE
Standby Mode is when the unit is first plugged into an AC power source (display flashes for a few
seconds and then shows 12:00) or after all the settings have been made and the time is showing on
the display. Standby mode is also enabled when the Button is pressed and all functions
(Bluetooth/Radio/AUX) are off, no buttons are pressed and no alarms are sounding.
TURNING THE UNIT ON/OFF
1. In Off (standby) mode, tap the
POWER/STANDBY
Button
on main unit or remote control to
turn the unit ON. The unit will turn on, the last selected input mode icon will show on LCD display.
2. To turn the unit OFF (standby), tap the
Button
on main unit or remote control again. The
LCD
DISPLAY
will go dim and show the current time. The standby mode indicator lights.
