2
I. INITIAL INSPECTION and ASSEMBLY
Carefully unpack the instrument and accessories. Inspect for
damages made in shipment. If any damage is found, notify your
Jenco
representative immediately. All packing materials should be
saved until satisfactory operation is confirmed.
MOUNTING PROCEDURE
1. Make a cutout on any panel, with a thickness of 1/16 in. (1.5 mm)
to 3/8 in. (9.5mm).
2. Remove the mounting assembly from the controller and insert the
controller into the cutout.
3. Replace the mounting bracket assembly onto the controller and
secure the controller to the mounting panel.
Warning:
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
3.66" 0.04
0.00
93.00mm1.00
0.00
93.00mm
3.66" 0.00
0.00
1.00
0.04
0.04"R(1.0mm) MAX.
PANEL CUTOUT DIMENSIONS