background image

 

29

X. WARRANTY

 

 
Jenco Instruments, Ltd. warrants this product to be free from 
significant deviations in material and workmanship for a period of 1 
year from date of purchase. If repair or adjustment is necessary and 
has not been the result of abuse or misuse, within the year period, 
please return-freight-prepaid and the correction of the defect will be 
made free of charge. If you purchased the item from our Jenco 
distributors and it is under warranty, please contact them to notify 
us of the situation. Jenco Service Department alone will determine if 
the product problem is due to deviations or customer misuse. 
 
Out-of-warranty products will be repaired on a charge basis. 
 
RETURN OF ITEMS 
Authorization must be obtained from one of our representatives 
before returning items for any reason. When applying for 
authorization, have the model and serial number handy, including 
data regarding the reason for return. For your protection, items 
must be carefully packed to prevent damage in shipment and 
insured against possible damage or loss. Jenco will not be 
responsible for damage resulting from careless or insufficient 
packing. A fee will be charged on all authorized returns. 
 

Note:

 Jenco reserves the right to make improvements in design, 

construction and appearance of our products without notice. 
 
 
 
 
 
 
 
 

Summary of Contents for 6308CT
































Reviews: