Jema Autolifte JA5500F, Installtion, Operation And Maintenance Instructions

Page: 12 / 36

12
3.4. Items to be checked after installation.
S/N Check items YES NO
1 Are the posts vertical to the floor?
2 Is the oil hose well connected?
3 Is the steel cable well connected?
4 Are two platforms well connected?
5 Are electrical connections, right?
6 Are the rest joints firmly screwed?
7 Are all items need lubricating added with grease?
4. Operation instructions
4.1 Precautions
4.1.1 Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
4.1.2 The lift, if its safety device malfunctions, shall not be used.
4.1.3 The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the platforms. Otherwise,
the Jema Autolifte as well as our dealers will not bear any responsibility for any consequence resulted thereby.
4.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
4.1.5 When the platforms rise to the desired height, switch off the power at once to prevent any mal operation done by
unconcerned people.
4.1.6. Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle
during lifting and lowering process.
4.2 Descriptions of control box
Description Function
Alarm buzzer Low height alarm
Power switch Control power connection
Power indicator Show if power is connected
UP button Control the UP movement
Safety lock Safety lock engaged
DOWN I button Control down movement
DOWN II button Control down movement
EMG.Stop Ensure safety in emergency conditions