Jema Autolifte JA5500F, Installtion, Operation And Maintenance Instructions

Page: 13 / 36

13
Switch on
Press the DOWN button
Platforms are lowered
Lowering
Switch on
Press the UP button
Motor drives the gear pump
work
Platforms are raised
Raising
The piston goes back to oil cylinder
4.3 Flow chart for operation
4.4 Operation instructions
Raise the lift
1. Make sure that you have read and understood the operation manual before operation.
2. Park the vehicle on the platforms to ensure its gravity is positioned midway of the platforms.
3. Switch on. When the power indicator is on, press the UP button until platforms rise to the desired height .
4. Before performing any service around or under the vehicle, operators must press the safety lock button to ensure the
mechanical safety lock is fully engaged, turn off the power so as to avoid any wrong operation done by irrelevant personnel
and check again the stability of the vehicle.
Lower the lift
1. Switch on. When the power indicating light is on, press the DOWN I and DOWN II button and then platforms of the list will
go down gradually.
2. Drive away the vehicle when platforms have lowered to the lowest position.
3. Turn off the power.