8
Description of keyboard (fig. 1 and 2)
Verbal messages generated by the wheel balancer upon pressing a button
are provided in square brackets.
Button setting the width of a wheel to be balanced [WIDTH]
Button setting diameter and distance of a wheel to be balanced
[DIAMETER] or [DISTANCE]
Button of selection of weights mounting manner with diode
signalisation [RIM TYPE CHANGE]
Memory button M1
– M3 [MEMORY READOUT]
Button changing parameters of distance, diameter, distance of a wheel to be balanced
(decreasing the values)
Button changing parameters of distance, diameter, distance of a wheel to be balanced
(increasing the values)
Button deleting the result of the last measurement [NEW MEASUREMENT]
Button of the wheel balancer calibration [CALIBRATION]
Button starting the “hidden weight” programme
Button of calculation of imbalances [CALCULATION OF IMBALANCES]
Button of selection of the cut-off threshold [THRESHOLD CHANGE]
— with diode
signalisation
Function button
CAUTION:
Every instance of pressing any of the buttons is confirmed by a sound
signal.
programme 1:
both weights clipped to the rim edge
programme 2:
both stick-on weights
programme 3:
one weight clipped on the inner correction plane; the other weight
stuck to the outer correction plane
programme 4:
static balancing (for thin rims, with one weight), not recommended
for car wheels
programme 5:
both weights stuck to inner side of the rim
programme 6:
one weight attached on the inner correction plane; the other weight
stuck to the inner side of the rim
