19
Disassembly of the nut clamp
Fig. 11
If in order to mount the wheel using centring discs and
cones in the centring system from the outer side of the
rim, it is required to remove the clamp from the nut.
To remove the clamp, it should be pulled axially so that it
is removed from the catch; it may be carefully levered
with a flathead screwdriver.
To place the clamp back, it should be pushed onto the nut
catch.
Electrical connection of the wheel balancer
CAUTION:
Plug the feeder cable into the socket 230V/50Hz.
CAUTION:
SINCE UNEXPECTED WARMING OF FROZEN METAL AND PLASTIC SOLID GENERATES
CONSIDERABLE QUANTITIES OF WATER VAPOUR CONDENSATE, IT IS FORBIDDEN TO
PLUG IN COOLED WHEEL BALANCER TO THE POWER NETWORK BEFORE THE LAPSE
OF 2 TO 3 HOURS REQUIRED TO DRY THE ELECTRONIC ELEMENTS AND THEIR
REACHING THE WORKSHOP TEMPERATURE. FAILURE TO COMPLY WITH THIS
REQUIREMENT MAY CAUSE DAMAGE TO THE WHEEL BALANCER. And with faulty
electrical installation it may cause electric shock.
