13
CHAPTER 4 INSTALLATION
WARNING
The following operations may be performed only by persons who were previously trained to
operate the machine to which this manual pertains.
In order to prevent potential damage to the balancer or hazard of causing personal injuries, it
is necessary to carefully follow the instructions below. It must be ensured that no people are
present within the working field.
Requirements regarding installation
The wheel balancer must be installed in the safe distance from walls, columns and other
devices.
The site must be equipped in advance with the power supply source and compressed air
system. The wheel balancer may be placed on any even, stable and dry floor.
All the parts must be uniformly lit with the light sufficient to safely perform all the operational,
adjustment and maintenance operations mentioned in this manual. Presence of any shaded
areas, light reflections and blinding light is inadmissible; any situations which may cause eye
strain should be avoided.
Lighting must be installed in accordance with the regulations applicable in the place of
installation (the lighting contractor shall bear this liability).
Prior to installing, all the parts must be unpacked and inspected for any signs of damage.
Issues regarding manoeuvring and lifting are discussed in the chapter “Packaging,
transportation
and storage”.
