12
AREA UNDER THE WHEEL BALANCER AND IN ITS DIRECT
SURROUNDING AS WELL AS THE ADAPTERS MUST BE KEPT CLEAN AT
ALL TIMES.
Immediately remove any oil stains. ___________________________________
Risk of electric shock
Danger of electric shock in the areas where electric wiring is routed.
It is forbidden to use water or vapour atomizers (high pressure washing equipment),
solvents or paints near the machine. These substances must not be allowed to spread to
the control panel.
Dangers caused by inadequate lighting
The operator and maintenance worker must be able to inspect if all the areas of the
machine are correctly and evenly lit, in accordance with the regulations applicable in the
country of installation.
Risk of damaging a component of the wheel balancer while it is in operation
In order to manufacture a reliable and safe wheel balancer, Jema Autolifte used appropriate
materials and manufacturing techniques adopted to the specified application of the
machine. However, it should be noted that the wheel balancer must be operated in
compliance with Jema Autolifte
’s recommendations. It is required to perform technical
inspections with a specified frequency (upon expiry of the warranty period) and
maintenance works described in Chapter 7
“MAINTENANCE”.
Never exceed admissible weight capacity of the balancer
— i.e. 60 kg.
IMPORTANT
Every use of the wheel balancer in a manner contrary to its intended purpose shall
entail the danger of causing serious injuries and accidents.
Therefore, it is particularly significant to strictly apply any and all recommendations
concerning operation, maintenance and safety, stipulated in this manual.
