33
CHAPTER 7 MAINTENANCE
Maintenance must be conducted by experienced personnel with profound knowledge of the
principles of operation of the wheel balancer. All precautionary measures must be applied during
maintenance operations in order to prevent accidental start-up of the wheel balancer. Master
switch must set to 0. In addition it is required to follow any and all instructions provided in chapter
3 “Safety”.
PERIODIC MAINTENANCE
In order to maintain the wheel balancer in good technical condition, it is recommended to comply
with the following instructions.
FAILURE TO APPLY THESE RECOMMENDATIONS SHALL ABSOLVE JEMA AUTOLIFTE
FROM ANY LIABILITY STIPULATED IN THE GUARANTEE.
1. Clean the wheel balancer at least once a month without using chemical cleaning agents and
high pressure spray guns.
2. Inspect the technical condition of the machine on a periodic basis.
3. Maintain conical connections on a periodic basis: adapter stud
– shaft ending
4. Inspect condition of wiring once a year.
5. It is suggested to integrate pneumatic system with a dewatering filter.
WARNING
ALWAYS REMOVE CONTAMINATIONS AROUND THE WHEEL BALANCER!
