20
CHAPTER 5 DESCRIPTION OF SUBPROGRAMMES
5.1 PROGRAMMING THE WHEEL BALANCER COMPUTER
Operation of the wheel balancer computer
The inspection shall be performed with the wheel mounted (tolerably only the rim) on the shaft.
Connection of the wheel balancer computer
Press power switch “1” on the wheel balancer Fig. 2 After completing the control testing, which is
signalled with a sound, the measuring indicator screen shall display the icons as in Fig. 1.
5.1.1 Entry of WIDTH parameter
Press the button
on the keyboard. The indicator screen displays symbol
and
the value of width recently entered to the memory. By pressing button
and
it
is possible to adjust this parameter, every half an inch in a range between 2 and15 inches.
5.1.2 Entry of DIAMETER parameter
Press the button
on the keyboard. The indicator screen displays symbol
and
the value of diameter recently entered to the memory. By pressing button
or
it is
possible to adjust this parameter, every inch in a range between 10 and 30 inches.
5.1.3 Entry of DISTANCE parameter
Press the button
on the keyboard. The indicator screen displays symbol
and the
value of distance recently entered to the memory
. Move controller “1” closer to rim “2” Fig. 12.
Read the value of distance and enter it to the memory by pressing
or
