JEI SOLUTIONS LTD
MAGBEAST HM40
5.2 (20130122)
Operators manual for Drilling Machine Magbeast HM40
- 10 -
4.2 Operating instructions
The machine is supplied in a metal box. Check if all parts listed in paragraph 3 are
included. Steel elements of the drilling machine are protected for transit and storing
with grease film. Before first startup of the machine all grease should be removed.
Before each use all spoke handles should be screwed into pinion.
Control panel,
Control elements include:
- 2-position main switch Magnet
- START-STOP switch
a)
In order to start the machine press the main switch on “I“ button. Now you can
start the mot
or by pressing green button “I”.
b) Stopping the motor is executed with red button
O” (then the motor is switched
OFF but the electromagnetic base is still ON).
c) To move machine into next drilling spot, stop the motor as described above
and push the mains switch to the position.
CAUTION: READ THE WHOLE INSTRUCTION MANUAL
BEFORE ATTEMPTING TO START UP
Drawing 4.
View of the machine HM40
HMhmHMMAGBEAST
e
