JEI SOLUTIONS LTD
MAGBEAST HM40
5.2 (20130122)
Operators manual for Drilling Machine Magbeast HM40
- 6 -
18) In the case that the machine falls on a hard surface, from a height, is wet or is
subjected to other unfortunate events that could affect its technical state - work
should be terminated immediately and the machine should be sent to service for
inspection as soon as possible.
Caution should be taken when machining plates with thickness lower
than 10 mm (0.4’’) because adhesion force depends on material thickness
and is significantly lower for thin plates. The whole surface of machine base
must stick to working material. Before every positioning, wipe working
surface with coarse-grained sandpaper.
Please keep all recommendations.
3. STANDARD EQUIPMENT
MAGBEAST HM40 comes in a standard equipment set which consists of:
metal box
- 1 pc
drilling machine
- 1 pc
cooling system
- 1 pc
2.5 Allen Key
- 1 pc
3 Allen Key
- 1 pc
4 Allen Key
- 1 pc
8 mm flat wrench
- 1 pc
spoke handles
- 3 pcs
safety chain with snap hook
- 1 pc
operator’s manual
- 1 pc
plastic box
- 1 pc
