JEI SOLUTIONS LTD
MAGBEAST HM40
5.2 (20130122)
Operators manual for Drilling Machine Magbeast HM40
- 8 -
4.1.1
Installing and uninstalling the arbor
The arbor installation and uninstallation should be carried out when the
machine is turned off and disconnected from the power grid!
Installing the arbor:
a) Raise the drive and the slide (1) up using the lever (3);
b) Raise the guard,
c) Clean the spindle (2) using a cotton cloth,
d) Before mounting, clean off the lubricant from the new arbor (4),
e) Place the arbor on the spindle, so that the flat sides of the spindle are found facing the
screws (5)
f) Tighten the screws securely (5)
1
2
3
4
5
Uninstalling the arbor:
a) Raise the drive and the slide (1) up using the lever (3);
b) Raise the guard in order to attain access to the arbor (4) screws (5).
c) Loosen the screws (5);
d) Remove the arbor (4).
