TEST
ACTION
APPLICABILITY
8
Turn the ignition off.
Disconnect the ABM harness connector.
Measure the resistance of the PCI Bus circuit between the ABM harness connector
and the Data Link connector.
Is the resistance over 5.0 ohms?
All
Yes
→
Repair the PCI Bus circuit for an open.
Perform ABS VERIFICATION TEST - VER 1.
No
→
Replace the Anti-Lock Brake Module in accordance with the
Service Information.
Perform ABS VERIFICATION TEST - VER 1.
9
Turn the ignition off.
Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or
partially broken wires.
Visually inspect the related wire harness connectors. Look for broken, bent, pushed
out, or corroded terminals.
Refer to any Hotline letters or Technical Service Bulletins that may apply.
Were any problems found?
All
Yes
→
Repair as necessary.
Perform ABS VERIFICATION TEST - VER 1.
No
→
Test Complete.
38
BRAKES (25E)
PCI BUS SHORTED TO VOLTAGE —
Continued
Summary of Contents for KJ Liberty 2005
Page 10: ...NOTES 8...
Page 11: ...7 0 DIAGNOSTIC INFORMATION AND PROCEDURES 9...
Page 56: ...NOTES 54...