Symptom:
MIC MESSAGES NOT RECEIVED
When Monitored and Set Condition:
MIC MESSAGES NOT RECEIVED
When Monitored:
Ignition On - Continuously
Set Condition:
When the ABM detects the MIC is not connected or not functioning
correctly for 10 seconds.
POSSIBLE CAUSES
CHECK FOR DTCS
VERIFY DTC
ATTEMPT TO COMMUNICATE WITH THE MIC
MODULE
TEST
ACTION
APPLICABILITY
1
Turn the ignition on.
With the DRBIII
t
, read BCM DTC’s.
Are any Cluster Wakeup Output DTC’s set?
All
Yes
→
Refer to symptom list for problems related to the cluster wakeup
circuit.
Perform BODY VERIFICATION TEST - VER 1.
No
→
2
Turn the ignition on.
With the DRBIII
t
, erase DTC’s.
With the DRBIII
t
, read DTC’s.
Did this DTC reset?
All
Yes
→
No
→
The condition that caused this DTC is currently not present. Use
the wiring diagrams/schematic as a guide, and inspect the related
wiring harness for a possible intermittent.
Perform BODY VERIFICATION TEST - VER 1.
3
Turn the ignition on.
With the DRBIII
t
, attempt to communicate with the Instrument Cluster (MIC).
Was the DRBIII
t
able to I/D or communicate with the Instrument Cluster (MIC)?
All
Yes
→
No
→
Refer to the Communication category for the related symptom(s).
Perform BODY VERIFICATION TEST - VER 1.
26
BRAKES (25E)
Summary of Contents for KJ Liberty 2005
Page 10: ...NOTES 8...
Page 11: ...7 0 DIAGNOSTIC INFORMATION AND PROCEDURES 9...
Page 56: ...NOTES 54...