45
58
8
Index 0
wiring
Connect the harness after stepping the mast.
You can access to the wiring harness at the level of the mast between the deck and the
inner mould.
Special conduits are available to complement the boat’s equipment (refer to drawing).
Never install electronic instruments or repeaters less than 1.50m away from the radio
loudspeakers.
P R E C A U T I O N
P R E C A U T I O N
In order to reduce the risks of electric shock and fire :
. Switch off the electric panel connected to the shore power plug on
shore before you connect or disconnect the shore power cable
. Connect the shore power cable in the boat before you plug it in the
power point on shore.
. Disconnect the shore power cable first on shore side then close tigh-
ly the power point on shore.
. Do not change the connections of the shore power cable
D A N G E R
D A N G E R
Never let the end of the shore power cable hang in the water. It may create a hazard
liable to hurt or kill people swimming close by.
MAST HARNESS CONNECTION
ELECTRONICS
SHORE POWER CABLE
Summary of Contents for sun odyssey 54 DS
