Chapter 15 Fiber Testing
120
CellAdvisor JD720C User's Manual
3
To select the pre-configured tip (optical settings) that you want to use, complete the following
steps:
a
Tap the drop-down list button for the
Tip
.
b
Select one of the tips available to your selected profile, from the following choices:
–
Standard Tips (with BAP1)
and
Simplex Long Reach (-L) Tips
–
Ribbon Tips
and
Ribbon Tips
– Long Reach
NOTE
This setting allows you to select the best optical settings for the type of inspection tip
that is attached to your microscope probe.
4
To set the function of the QuickCapture button on the side of the P5000i, select the
Test Button
option from the following choices:
–
Freeze and Test:
Sets the capture button to function the same as the Test screen key on
your JD720C series. Pressing the QuickCapture button captures and analyzes fiber image.
–
Freeze Image:
Sets the capture button to function the same as the Freeze screen key on
your JD720C seris. Pressing the QuickCapture button captures fiber image.
5
Optional
. Select the
Auto Center
option between
On
and
Off
. Default setting is
On
.
It automatically displays the center of the fiber when viewing at high magnification.
6
Optional
. To integrate stored OPM readings into a fiber analysis report, check the box for the
Link OPM readings with fiber analysis
.
7
Tap the
Apply
button to save and exit.
Figure 77
Info/Setting window
Performing fiber inspection
Capturing fiber image
Procedure
1
Connect the fiber to be inspected to the tip of your microscope P5000i.
See the user manual of your fiber microscope for details on using the P5000i.
