56
VIII Die cutting unit
The die-cutting position is located in the penultimate third position of the
printing line, in front of the matrix unit and the rewind unit. The die-cutting
position has two die-cutting unit mounting bits, and the die-cutting pattern you can
be completed by die-cutting.
The die cutting unit contains multiple components, including die cutting cylinder,
cutting roller, transmission roller, die cutting frame assembly, pressure mechanism,
safety cover shell assembly. Each component is very important for the die cutting
unit. Before use, you must make sure that you have carefully read the contents
described in this manual and have a clear understanding of each component.
Die-cutting unit
Specification of die-cutting unit
Magnetic die-cutting cylinder
size
96 ～ 200 Z (Optional outer circle diameter
97.02 ~ 202.13 mm)
Max.paper width
425 mm
Max.die-cutting width
420 mm
Max.die-cutting speed
120 m/min
Clearance between die-cutting
cylinder and anvil roller
0.48 mm
Die-cutting tool thickness
0.44 mm
Die-cutting cylinder working
pressure
30-60bar
Summary of Contents for JDL-420 Series
Page 1: ...1...
Page 16: ...16 Figure 3 1...
Page 55: ...55 3 4 Paper route of cold foil unwinding and rewinding...
