10
II Safety instruction
一、Safety instruction
1. The printing press shall be operated and used by trained professionals. The
installation and commissioning of the machine must be carried out by our own
specialists or by our authorized specialists.
2. For your safety and the protection of the machine, please read the instructions
in details before using the machine. During use, you should operate the machine
strictly according to instructions of the manual, especially pay more attention to
the safety notes.
3. Our company shall not accept any claims for any personal injury or damage caused
by any use of the machine not in accordance with the parameters specified in the
instructions and for the operation of the machine not in accordance with the
provisions of the instructions.
4. The ignition point of the printing ink must be higher than 21 °C. Thickness of
substrate: 100-200
μ
m
二、Management standard
1. Please keep the manual next to the machine so that you can read it at any time
2. In addition to what is mentioned in the operation manual, the operation must
comply with the regulations on accident prevention and environmental protection
stipulated by local laws at the same time.
3. For safety reasons, staffs are required to wear clean work clothes. Sleeves and
chest buttons must be buttoned up, not open chest.
Ladies must wear hair caps to
enter the workshop.If ladies do not wear hair caps, they are not be allowed to
operate the machine. It is strictly forbidden to use the machine in shoes, high
heels, earplugs, long skirts, long hair, and other violations of the relevant
operating rules
4. This model uses alcoholic system. Alcohol, printing ink, printing paper and
grease belongs to flammable items. If the machine is placed in a closed space, pay
attention to the flammable gas concentration and ensure air exchange timely to
avoid spontaneous combustion or explosion. The printing workshop must make good
fire prevention measures and strictly prohibit fireworks.
5. Compliance with safety and warning instructions on the machine.
Summary of Contents for JDL-420 Series
Page 1: ...1...
Page 16: ...16 Figure 3 1...
Page 55: ...55 3 4 Paper route of cold foil unwinding and rewinding...
