DIFF THRUST WASHER
x 2
DIFF SPRING
x 1
SHORT OUTDRIVE HUB
x 1
LONG OUTDRIVE HUB
x 1
DIFF BOLT
x 1
3/16 X 5/16
DIFF BEARING
x 2
DIFF T-NUT
x 1
5/64 THRUST BALL
x 6
3/32 DIFF BALL
x 12
DIFFERENTIAL RING GEAR
x 1
DRIVE RING
x 2
DRIVETRAIN COMPONETS (DIFF x 2)
THRUST BALL ASSEMBLY:
1. HOLD THE DIFF BOLT WITH THE 5/64" ALLEN WRENCH
AND SLIDE ONE THRUST WASHER ONTO THE DIFF BOLT.
2. APPLY A GENEROUS AMOUNT OF BLACK GREASE TO THE
WASHER ON THE SIDE FACING AWAY FROM THE BOLT HEAD.
3. PLACE SIX THRUST BALLS INTO THE GREASE AGAINST THE BOLT
AND WASHER. ADD THE OTHER THRUST WASHER. THE GREASE
WILL HOLD THE BALLS IN PLACE DURING ASSEMBLY,
SANDWICHED BETWEEN THE WASHERS.
APPLY GENEROUS AMOUNT OF BLACK GREASE
HOLD WITH 5/64" ALLEN
WRENCH
DIFF BOLT
THRUST WASHERS
5/64
THRUST
BALLS
x 6
SHORT HUB ASSEMBLY:
1. INSERT THE THRUST ASSEMBLY INTO THE SHORT OUTDRIVE HUB.
2. ADD A LIGHT COAT OF STEALTH LUBE TO THE SHORT HUB FACE
WHERE SHOWN.
3. PLACE A DIFF DRIVE RING ONTO THE FACE OF THE SHORT HUB.
4. SLIDE A DIFF BEARING ONTO THE PROTRUSION OF THE SHORT HUB.
SMEAR A SMALL AMOUNT OF STEALTH LUBE
HERE TO HOLD THE DIFF DRIVE RING IN PLACE
THRUST ASSEMBLY
SHORT OUTDRIVE HUB
3/16 x 5/16 DIFF BEARING
DIFF DRIVE RING
NOTE: REMOVE ANY OIL RESIDUE FROM OUTDRIVE
HUB THOROUGHLY BEFORE APPLYING STEALTH LUBE
OUTDRIVE SHIM
x 1
BAG C
STEP 1
STEP 2
PAGE 5
Summary of Contents for BJ4
Page 1: ......
