TRANSMISSION COMPONENTS
8°
FRONT TRANSMISSION HOUSING
REAR TRANSMISSION HOUSING
4-40 x 5/16"
BUTTON HEAD
x 2
4-40 x 3/8"
BUTTON HEAD
x 4
4-40 x 3/8"
FLAT HEAD
x 6
4-40 x 3/8"
SOCKET HEAD
x 8
4-40 x 1/8"
SET SCREW
x 2
1. ATTACH THE FRONT, LOWER TRANSMISSION HOUSING TO THE CHASSIS
AND FRONT BULKHEAD USING TWO 4-40 x 5/16" BUTTON HEAD SCREWS
IN THE FRONT AND TWO 4-40 x 3/8" FLAT HEAD SCREWS IN THE BACK.
2. ATTACH THE REAR, LOWER TRANSMISSION HOUSING
TO THE REAR OF THE CHASSIS USING FOUR 4-40 x 3/8"
FLAT HEAD SCREWS.
3. TEMPORARILY SCREW A 4-40 x 1/8" SET SCREWS INTO
EACH SIDE OF THE REAR SUSPENSION MOUNT (FRONT).
LATER IN THE ASSEMBLY, IT WILL BE NECESSARY TO TIGHTEN
THESE SET SCREWS AGAINST THE REAR HINGE PINS.
A SMALL AMOUNT OF THREAD LOCKING COMPOUND
WILL BE ADDED AT THAT TIME.
TRANSMISSION CASE ASSEMBLY:
4-40 x 3/8"
FLAT HEAD
x 2
4-40 x 5/16"
BUTTON HEAD
x 2
4-40 x 3/8"
FLAT HEAD
x 4
4-40 x 1/8"
SET SCREW
x 2
BAG C
STEP 10
PAGE 9
Summary of Contents for BJ4
Page 1: ......
