ITEMS NEEDED TO COMPLETE YOUR CAR:
1. R/C TWO CHANNEL SURFACE
FREQUENCY RADIO SYSTEM
2. BATTERY PACK (6 CELL SADDLE PACK)
3. BATTERY CHARGER (PEAK DETECTION)
4. ELECTRONIC SPEED CONTROL
5. R/C ELECTRIC MOTOR
6. PINON GEAR (SIZE TO BE DETERMINED
BY MOTOR CHOICE)
7. 1/10TH SCALE 4WD FRONT TIRES
(BOX ART SHOWN: BLOCKHEAD)
8. 1/10TH SCALE BUGGY REAR TIRES
(BOX ART SHOWN: X-2000)
4. HELPFUL TOOLS (NOT REQUIRED)
A. VERNIER CALIPERS
B. HOBBY SCISSORS
C. 2.5mm BALL END HEX DRIVER
3. MISC. TOOLS
A. NEEDLE NOSE PLIERS
B. THREAD LOCKING COMPOUND (BLUE)
C. HOBBY KNIFE (DANGER!) THIS KNIFE CUTS
PLASTIC AND FINGERS WITH EQUAL EASE
D. PRECISION RULER
E. FLAT FILE
2. NUT DRIVERS
A. 3/16"
B. 1/4"
C. 11/32"
1. ALLEN WRENCHES
A. .050"
B. 1/16"
C. 5/64"
D. 3/32"
E. 2.5mm
TOOLS NEEDED TO BUILD THIS KIT
CHASSIS PREPARATION:
CHASSIS
x 1
TOP DECK x 1
(2 PIECES)
STEERING RACK
x 1
BATTERY TRAY
x 2
BATTERY STRAP
x 2
BEARING BLOCK
x 2
FRONT SHOCK
TOWER x 1
REAR SHOCK
TOWER x 1
CHASSIS COMPONENTS
FILE
NOTE CHASSIS
ORIENTATION
NOTE: THIS IS A CLEARANCE FOR THE BOTTOM OF THE REAR
TRANSMISSION CASE. A PROPERLY FILED CHASSIS WILL ALLOW
THE REAR TRANSMISSION CASE TO SIT FLAT ON THE CHASSIS.
FILE CAREFULLY! USE THE PROPER CASE TO CHECK THE FIT
WHILE REMOVING A SMALL AMOUNT OF MATERIAL AT A TIME.
1. FILE REAR TRANSMISSION SLOT WITH
THE BOTTOM SURFACE OF THE FILE.
FILE AT THE GREATEST ANGLE POSSIBLE
WITHOUT THE TOP SURFACE OF THE FILE
HITTING THE OTHER SIDE OF THE SLOT.
SEE FIGURE 1.
2. REFER TO FIGURE 2 FOR COMPLETED COMPARISON.
FIGURE 1
FIGURE 2
TOOLS
BAG A
STEP 1
PAGE 1
Summary of Contents for BJ4
Page 1: ......
