1. INSTALL THE FRONT AND REAR DIFF ASSEMBLIES IN THE LOWER
TRANSMISSION CASES AS SHOWN BELOW.
2. INSTALL THE FRONT AND REAR INPUT SHAFT ASSEMBLIES AS
SHOWN BELOW. BE SURE TO INSERT THE DOGBONE END OF
EACH CVD ASSEMBLY INTO THE CENTER SLIPPER OUTDRIVE.
3. ADD A SMALL AMOUNT OF STEALTH LUBE TO THE FRONT SIDE
OF THE RING GEAR AND PINON GEAR ON BOTH ASSEMBLIES.
4. ATTACH EACH UPPER TRANSMISSION CASE WITH FOUR
4-40 x 3/8" SOCKET HEAD SCREWS AND TWO 4-40 x 3/8"
BUTTON HEAD SCREWS.
4-40 x 3/8"
BUTTON HEAD
x 2
4-40 x 3/8"
BUTTON HEAD
x 2
CENTER CVD INPUT SHAFT
"REAR"
CENTER CVD INPUT SHAFT
"FRONT"
APPLY A SMALL
AMOUNT OF
STEALTH LUBE
TRANSMISSION ASSEMBLY:
APPLY A SMALL
AMOUNT OF
STEALTH LUBE
COMPARE DRIVETRAIN ASSEMBLY:
4-40 x 3/8"
SOCKET HEAD
x 4
4-40 x 3/8"
SOCKET HEAD
x 4
STEP 11
PAGE 10
STEP 12
Summary of Contents for BJ4
Page 1: ......
