![background image](http://html1.mh-extra.com/html/jcm-global/ivizion-series/ivizion-series_operation-and-maintenance-manual_3543287077.webp)
P/N 960-100929R_Rev. 3 {EDP #148849}
© 2012, Japan CashMachine Co., Limited
6 - 1 7
Calibration and Testing
iVIZION® SeriesNext-Generation Banknote Acceptor Unit
Section 6
ICB Function Setting
This portion provides information about each
Screen Button located on the “
ICB Function
”
Screen shown in
The following three (3) setting types are available
for use with the ICB Functions:
•
Setting the ICB Enable/Disable Function
•
Setting the Machine Number
•
Setting the ICB Inhibit Function.
S
ETTING
ICB E
NABLE
/D
ISABLE
F
UNCTIONS
The following portion explains each ICB setting
when activated:
1. Mouse-click on the large “
2) ICB SETTING
”
Screen Button (See Figure 6-73 a) located on the
“
iVIZION Utility Tool
” Screen.
2. Confirm that the “
ICB Function
” Screen shown
in Figure 6-74 appears (See Figure 6-74). Seven
(7) Screen Buttons exist on this Screen.
To begin using the
“
ICB Function
”
Screen Buttons,
select the ICB “
Enable / Disable
” Function desired
by first Mouse-clicking on the appropreate Screen
Button (
).
Enable Screen Button Activation
Set the ICB “
Enable
” Function when an RFID
Circuit Board exists on the iVIZION
®
Unit.
However, if the Cash Box IS SET to a “
System
Inhibit
” condition, or the RFID Circuit Board IS
NOT present, the Status LED will flash at a
Blue
Color rate to notify that an error exists (See Table
6-7 on page 6-19 of this Section to resolve this
issue).
To set ICB Enable proceed as follows:
1. First, confirm that the Cash Box setting IS NOT
set to “
System Inhibit
”; then Mouse-click on the
“
Enable
” Screen Button (See Figure 6-74 a) to
activate the ICB Function.
2. When the ICB Function is correctly enabled, the
“
ICB Successfully Enabled.
” pop-up Dialog
Message Window shown in Figure 6-75 will
appear.
3.
Mouse-click the “
OK
” Screen Button (See Figure
6-75 a) to accept the reported message.
Figure 6-70
iVIZION Utility Tool Version X.XX for
Suite Edition Screen 1
b
a
Figure 6-71
Empty CIS IMAGE Screen
b
a
c
Figure 6-72
Last Acceptance CIS IMAGE Screen
a
c
b
NOTE: The CIS Image data will not be
retained if the iVIZION’s Power Supply is
turned OFF after stacking the last Banknote!
Figure 6-73
iVIZION Utility Tool Version X.XX for
Suite Edition Screen 2
a
Figure 6-74
ICB Function Screen
a
b
KF srl | www.keyfuture.com | Phone +39 059313920
KF srl | www.keyfuture.com | Phone +39 059313920