![background image](http://html1.mh-extra.com/html/jcm-global/ivizion-series/ivizion-series_operation-and-maintenance-manual_3543287061.webp)
P/N 960-100929R_Rev. 3 {EDP #148849}
© 2012, Japan CashMachine Co., Limited
6 - 1
Next-Generation Banknote Acceptor Unit
S e c t i o n 6
This section provides Calibration and Performance
Testing instructions for the iVIZION
®
Next-Gen-
eration Banknote Acceptor Unit and contains the
following information:
•
Download and Installation Workbench Tool
Requirements
•
Application Software Installation Procedure
•
Driver Installation Procedure
•
JCM Tool Suite Standard Edition Mode
•
Software Download Tool Requirement
•
Software Downloading Procedure
•
When to Calibrate
•
Reference Paper Placement
•
Calibration Tool Requirements
•
Calibration Preparation
•
Calibration Procedures
•
Performance Tests with a PC
•
Performance Test Tool Requirement
•
Performance Test Preparation
•
Performance Tests with the External Switch
•
Utility Function.
Download and Installation Work-
bench Tool Requirements
Figure 6-1 illustrates and list identifies the tools
and equipment interconnects necessary to down-
load and install the iVIZION
®
Device.
Application Software Installation
Perform the following steps to install the “JCM
Tool Suite Standard Edition” Application Software
(Refer to Figure 6-1 and Figure 6-2 for the neces-
sary Tool and Harness Connections and USB Cable
Type Requirements respectively).
1. Copy the “
JCMToolSuiteStandardEdition.zip
”
Application Software and extract on the Desktop.
2. Open the Third Layer of the extracted Folder and
Double-click on “
Setup.exe
”(See Figure 6-3 a).
The “
JCM Tool Suite Standard Edition - Install
Shield Wizard
” Screen shown in Figure 6-4 will
appear.
3. Mouse-click
on
“
Next>
6-4 a).
4. When the “
Custom Information
Screen” shown in
Figure 6-5 appears, Mouse-click on the Radio
Screen Button
located next to the “
Anyone
who use this computer
Mouse-click on “
Next>
” Screen Button.
6 CALIBRATION AND TESTING
Figure 6-1
Tool and Harness Connections
a) iVIZION
®
Device
b) Power Supply
c) PC (OS: Windows XP)
d) USB Cable
d
1
) USB “A” Terminal Plug
d
2
) USB Mini “B” Terminal Plug
e) iVIZION
®
USB Driver (usbivizion.inf)
f) Application Software*
(JCM Tool Suite Standard Edition).
*. Containing USB Downloader, Sensor Calibration, Performance
Test programs and Utility Function.
a
b
d
d
1
d
2
e, f
c
Figure 6-2
USB Cable Type Requirement
a) PC Side (USB A Terminal)
b) iVIZION Side (USB Mini-B Terminal)
a
b
Figure 6-3
Setup.exe File Location
a
Figure 6-4
Install Shield Wizard Screen
a