![background image](http://html1.mh-extra.com/html/jcm-global/ivizion-series/ivizion-series_operation-and-maintenance-manual_3543287045.webp)
P/N 960-100929R_Rev. 3 {EDP #148849}
© 2012, Japan CashMachine Co., Limited
2 - 1 7
Installation
iVIZION® Series Next-Generation Banknote Acceptor Unit
Section 2
O
PERATIONAL
F
LOWCHART
(C
ONTINUED
2)
Figure 2-18 depicts a typical iVIZION
®
LD Banknote flow process (Validation).
b) Is Banknote Unacceptable?
a) Is Validation Result OK?
c) Output the Denomination Value Signal
d) Receive Stacking Command?
e) Reject Banknote
f) Continue Transporting Banknote
g) Is Banknote sent to Stacker?
A) Begin Validating
h) Output a VEND Signal)
i) Stop due to Abnormal Condition or return to
Stand-by Mode?
j) Stop Performance: Output Abnormal
Signal (*1)
*1 When Abnormal Output Signal condition occurs, remove the Banknote causing the malfunction and re-apply power to the Unit, or send a Reset
Command to the Banknote Acceptor.
C) Return To Stand-by Mode (See Figure 2-17)
Figure 2-19
iVIZION LD Banknote Acceptor Operational Flowchart (Part 2 - Validating)