JBT FRESH'N SQUEEZE, Operators & Service Manual

Page: 26 / 80

26
FNS-0002-060-EN January 2017 Rev F
Periodic Inspection (continued)
8. Check alignment of fruit lift.
Refer to Figure 14.
Fruit lift agitator dividers must align with the middle of slots in bottom of hopper.
a. Fruit lift adjustment:
Refer to Figure 15.
Loosen the two cap screws attaching the fruit lift to upper cup drive arm. Adjust fruit lift.
Tighten cap screws.
b. Fruit lift repair:
If fruit lift is damaged (bent, but not broken), it can be removed and straightened.
Remove hopper before fruit lift. Straighten fruit lift.
Reinstall fruit lift with Loctite #242 on cap screws.
9. Check to make sure two plastic bearing buttons have been installed on bottom face of
fruit lift. Refer to Figure 16.
Figure 14. Fruit Lift Alignment Figure 15. Fruit Lift Bolts
Figure 16. Fruit Lift Plastic Bearings