17
VTX A
8
| Rigging Manual
6.3 - ANGLE SELECTION
Each VTX A8 includes two Angle Selection panels (one on each side) that are used for selecting the cabinet-to-cabinet splay angle. The
options are marked in degrees and the panel allows for eleven unique positions ranging from 0.25 degrees to 10 degrees.
VTX A8 ANGLE OPTIONS:
0.25°, 0.5°, 1°, 1.5°, 2°, 2.5°, 3°, 4°, 6°, 8°, 10°
A dedicated quick release pin is available for selecting the angles. Angles are selected when the VTX A8 cabinets are set on the VTX
A8 VT and resting on the ground. When the system is on the ground, the Quick Release Pins are not under load and can move freely to
the desired position. During transportation, VTX A8 cabinets should always be set to 10 degrees. This ensures that the rigging system
is locked, preventing any accidental movement or angle selection.
To select an angle, remove the Quick Release Pins from the storage position (10°) and set them to the desired position. After the array
has been lifted from the ground, the weight is shifted to the Quick Release Pins and selecting an angle is no longer an option.
CAUTION:
All Quick Release Pins on a VTX A8 system must always be placed in a hole. Do not suspend a VTX A8 system
if the pins are hanging freely.
