35
VTX A
8
| Rigging Manual
9 - DEPLOYING STANDALONE A8 SYSTEMS
Suspending standalone VTX A8 arrays is a simple and straightforward process. Carefully follow the next few steps to correctly and safely
suspend an array. Instructions on how to suspend A8/B18 combination arrays can be found later in this document.
9.1 - PRESELECT THE ANGLES
STEPS:
• Using the Quick Release Pins (QRPs) located on the
Angle Selection Panel
, select the desired inter-enclosure splay angles for
all cabinets. Do this by removing the QRP from it’s 10-degree storage position and moving it to the desired position indicated
by the label. If the desired angle is 10 degrees, then the QRP does not need to be moved since the 10-degree position is also
the transport position.
1
1°
2.5°
3°
4°
6°
8°
10°
STORAGE
2°
1.5°
25°
ANGLE SELECTION PANEL
1
Pin Position:
4°
