36
VTX A
8
| Rigging Manual
STEPS:
• Lift each one of the A8 enclosures using the rear panel handle until the cabinet extents to its final position.
• Use your hands to pull up the top rigging arms until fully engaged. The stack connected to the array frame does not need to
be manually extended since the electric hoist will lock the cabinets once suspended.
1
2
9.2 - PRE-LOCKING THE ANGLES (OPTIONAL STEP)
This next step is optional and is not a requirement, but a convenient shortcut. After the angles have been selected, the A8 cabinets can
be extended and locked while still on the ground. This can make connecting flown cabinets to cabinets on the ground much easier since
the rear rigging connection points are in a much higher in elevation and can connected to the flown arrays much easier. The A8 cabinets
are lightweight enough were the angles can be locked simple by lifting each enclosure using the rear panel handles.
CAUTION:
If all enclosures of a stack are set to narrow angles positions (0.25° - 3°), not all enclosures should be fully
extended to avoid potential risk of tipping. Extend the cabinets just enough to make connecting to the flown array easier.
The A8 auto-locking mechanism will always keep the cabinets locked and secured.
1
1
2
2
2
