© JBG-HT (v.2.0)
27
INSTRUCTION MANUAL
– HEAT PUMP
b) Stand
Guidelines for setting the heat pump on the ground are presented in Fig. 21.
>1,0 m
ø 160 mm
300 mm
>1,0 m
300 mm
ø 100 mm
Fig. 21. Guidelines for mounting the heat pump outdoor unit on the ground on rubber feet.
4.6.1.2.
Connecting the outdoor unit to the indoor unit
1 ) After mounting the outdoor and indoor units,
look for the nearest place in the wall to make a
hole. It is recommended that the hole be char-
acterized by the best water resistance.
2 ) After determining such a place in the wall, drill a
hole with a diameter of 50-100 mm.
3 ) After making the hole, you need to run two
pipes through the wall. Be sure to properly
insulate the hole with thermal insulation, such
as insulating foam.
Summary of Contents for ZHHS-01-10K-R290-V5-M
Page 2: ......
