ELITE Series Adjustable Portable Backstop Instructions
- 25 of 28-
JSL-Inst039
www.jayprosports.com
For installation in all floor types other than floating wood floors, Refer to FP-
89 installation instructions (included with kit) for details.
For installation in floating wood floors ONLY, unscrew the top plate from
the FP-89 floor anchor (Figure 11-1) and install with the brass cover plate
(Figure 5-7). Refer to FP-100 installation instructions (included with kit) for
details.
For all floor types, locate holes for floor anchors according to the
appropriate diagram:
a.
PBEL54 (54” overhang): refer to Figure 10-1
b.
PBEL66 (66” overhang): refer to Figure 10-2
c.
PBEL96 (96” overhang): refer to Figure 10-3
Figure 11-1: Unscrew top plate of FP-89 to convert for use in floating wood floors.
Anchor the PBEL backstop to the floor anchor using the supplied shackles,
chain, and eyebolt. Attach anchor kit to eye on rear of ballast tray.
12
Raising/Lowering Backstop
WARNING: DO NOT STAND DIRECTLY BEHIND UPRIGHTS WHEN RAISING OR LOWERING THE
BACKSTOP. SEE Figure 8-1 FOR DETAILS ON WHERE TO SAFELY POSITION YOURSELF WHEN
RAISING/LOWERING THE BACKSTOP.
WARNING: BE SURE THAT AREA WITHIN 8 FEET (2.5 METERS) IS CLEAR OF BYSTANDERS
BEFORE RAISING OR LOWERING.
WARNING: DO NOT USE BACKSTOP UNLESS IT IS PINNED AT GAME-HEIGHT USING THE
SUPPLIED QUICK RELEASE PIN.
WARNING: UNIT MUST BE PINNED IN POSITION USING SUPPLIED QUICK-RELEASE PIN AT ALL
TIMES UNLESS RAISING OR LOWERING.
WARNING: WHEN RAISING OR LOWERING, DO NOT RELEASE HANDLES UNLESS BACKSTOP IS
PINNED IN POSITION WITH THE SUPPLIED QUICK-RELEASE PIN.
Unscrew
top plate
