ELITE Series Adjustable Portable Backstop Instructions
- 21 of 28-
JSL-Inst039
www.jayprosports.com
Figure 9-13: Fasten front pad with U-Clips for PBEL54.
3.
Install the upright pads:
c.
Fasten the upright pad to the front using the hook-and-loop
straps.
d.
Secure the upright pad in place by fastening an L-Clip upside
down to the inside surface of the upright pad, such that the
clip rests on one of the horizontal supports of the upright
(Figure 9-12).
10
Installing Locating Devices
There are two methods available for locating your PBEL portable backstop
repeatedly and accurately.
In the first method, bushings (supplied) are installed in the floor. These
bushings allow alignment pins (supplied) from the PBEL base frame to
positively locate your backstop. Refer to section 10.1 for location and
installation of bushings.
In the second method, locating stickers (supplied) that indicate the
positions of the PBEL feet are applied to the floors. Refer to section 10.2 for
location of stickers.
The advantage of using the bushings for location is that the repeatability
and accuracy of location are guaranteed and that it can prevent the
unit from shifting slightly during aggressive play. The disadvantage is that
installation of the bushings requires that holes be drilled in your gym floors.
This may not be desirable or possible, depending on the type of floor.
