ELITE Series Adjustable Portable Backstop Instructions
- 20 of 28-
JSL-Inst039
www.jayprosports.com
Figure 9-12: L-Clips fastened to the front pad before U-Clips.
9.3
PBEL54 Padding Installation
1.
Install the left and right side pads.
a.
Locate the side pads by aligning the holes on the inside faces
of the pads with the hubs on the sides PBEL base frame
(Figure 9-10). HINT: Place the front pad against the front of
the frame to ensure that the side pads are located correctly,
front-to-back.
2.
Install the front pad:
a.
Use shims to support the front pad against the front of the
base frame such that the top of the front pad is flush with the
tops of the side pads. Ensure that the front surfaces of the
side pads are snug with the rear surface of the front pad.
b.
Fasten front pad to base frame using two U-Clips along the
top horizontal 2x4 and two U-Clips along the bottom
horizontal 2x4 (Figure 9-13).
