ELITE Series Adjustable Portable Backstop Instructions
- 17 of 28-
JSL-Inst039
www.jayprosports.com
9.2
PBEL66/96 Padding Installation
1.
Raise the uprights to 10’0” height.
2.
Install the top pad on top of base frame as shown below.
Figure 9-8: Top pad installation.
3.
Install the front pad:
a.
Align the top of the front pad with the top of the top pad.
b.
While holding the front pad in place, remove the top pad.
c.
On the rear of the front pad, mark the location of top edge
of the top horizontal 2x4 of the base frame.
d.
Install 2 L-clips to the front pad such that the tops of the clips
align with the line marked on the pad in the previous step.
Figure 9-9: L-Clips fastened to the front pad before U-Clips.
TOP HORIZONTAL
2x4
