![background image](http://html1.mh-extra.com/html/jayco/eagle-fw-2021/eagle-fw-2021_owners-manual_3566577039.webp)
Section 3: Pre-Travel Information
37
Your recreation vehicle manufacturer cannot be responsible for the suspension system
of any tow vehicle. There are a variety of tow vehicle suspension systems available that
will affect the pin box height, stability and levelness of a hooked up RV.
Make sure your
dealer is aware of the tow vehicle you are using so a compatible hookup is achieved.
Fifth Wheel Pin Box
The fifth wheel factory installed pin box is not interchangeable. Maintain the proper pin box
weight on the hitch.
Fifth Wheel Pin Box Height
There is no recommended hitch height for fifth wheels; usually the fifth wheel pin box is
adjustable for variance in trucks and truck suspension systems.
Adjust the hitch assembly so the tow vehicle and the fifth wheel are essentially level. A high
hitch will transfer weight behind the axles and cause the vehicle to fishtail.
A low hitch will transfer additional weight to the hitch. Refer to the hitch manufacturer
instructions to adjust the weight distributing hitch to the proper height.
If you have additional questions, consult with your dealer. Make certain your Dealer is
aware of the tow vehicle you are using so a compatible hookup is achieved.
Fifth Wheel Hitching Procedure
The following procedure will help to assist you in securely hooking up your recreation ve-
hicle to your tow vehicle.
1.
Make sure the trailer wheels are blocked.
2.
Make sure the hitch lever is in its open or “cocked” position unless it has been designed
to open automatically. Adjust the fifth-wheel travel trailer pin to the proper height.
Lower the tailgate, if applicable.
3.
Back the truck so the hitch encircles the fifth-wheel/travel trailer pin.
4.
A gentle contact of the hitch saddle against the pin will cause the mechanism to close.
5.
Secure the hitch lever as specified by the manufacturer.
6.
Put the truck in drive (DO NOT press on the accelerator) and ‘bump’ the hitch to make
sure it is locked.
7.
Be sure to raise the fifth-wheel landing gear all the way up.
8.
Attach the breakaway switch cable to the tow vehicle.
9.
Plug the wire harness/connector plug from the tow vehicle to the fifth wheel.
10. Remove the wheel chocks from the trailer wheels.
Fifth wheel landing gear
can be operated manually. The fifth wheel landing gear must be
fully retracted before moving or towing the RV to prevent damage.
DO NOT USE THE FIFTH WHEEL LANDING GEAR TO SUPPORT
THE TOW VEHICLE WEIGHT.
The fifth wheel landing gear is designed
to bear the front loaded weight of the RV only.
Summary of Contents for Eagle FW 2021
