background image

Warranty

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2 0 0 2   N E P T U N E

1

HOLIDAY RAMBLER 

MOTORHOME LIMITED WARRANTY

What the Period of Coverage Is:

If you use your Holiday Rambler® motorhome only for recreational travel

and family camping purposes, the Limited Warranty provided by Holiday
Rambler ("Warrantor") covers your new motorhome when sold by an author-
ized dealer, for twelve (12) months from the original retail purchase date or the
first 24,000 miles of use, whichever occurs first.  However, the Limited
Warranty provided by Warrantor covers the steel or aluminum frame structure
of the sidewalls (excluding slide outs), roof, and rear and front walls for sixty
(60) months from the original retail purchase date or the first 50,000 miles of
use, whichever occurs first.

If you use your motorhome for any rental, commercial or business purposes

whatsoever, the Limited Warranty provided by Warrantor covers your new
motorhome when sold by an authorized dealer for ninety (90) days from the
original retail purchase date or the first 24,000 miles of use, whichever occurs
first.  In addition, the Limited Warranty provided by Warrantor covers the steel
or aluminum frame structure of the sidewalls (excluding slide outs), roof, and
rear and front walls for twelve (12) months from the original purchase date or
the first 24,000 miles of use, whichever occurs first.  A conclusive presumption
that your motorhome has been used for commercial and/or business purposes
arises if you have filed a federal or state tax form claiming any business tax
benefit related to your ownership of the motorhome.

The above Limited Warranty coverage applies to all owners, including sub-

sequent owners, of the motorhome.  However, a subsequent owner must submit
a warranty transfer form by filing the form through an authorized Holiday
Rambler dealer.  A subsequent owner's warranty coverage period  is the
remaining balance of the warranty coverage period the prior owner was enti-
tled to under this Limited Warranty.   Warranty transfer forms can be obtained
by contacting the Consumer Affairs Department.  There is no charge for the
transfer.

WARRANTY 

LIMITED 

2002 Neptune

WARRANTY LIMITED •  1

WARRANTY LIMITED - ROADMASTER CHASSIS •  5

WARRANTY INFORMATION FILE •  8

Summary of Contents for 2002 NEPTUNE

























































































































































































































































































































































Reviews: