Jayco Baja J/TRAX, Owner'S Manual

Page: 75 / 101

0
Turn off the electric current when this
bedding is not in actual use.
Maintenance
Unplug the bed mats first. Wipe gently or blot
the soiled area, using a damp cloth treated
with a mild detergent. DO NOT IMMERSE.
Allow to dry thoroughly before plugging in for
use.
S
LIDEOUT
R
OOM
S
YSTEM
(I
F
S
O
E
QUIPPED
)
The slideout room system is designed for
additional floor space and comfort. For the
slideout system to work properly, the RV must
be leveled before extending the room.
Periodically check the accuracy of the leveling
system. Check the vehicle leveling system by
placing a circular bubble level in the center of
the refrigerator bottom shelf with the RV
leveled.
J-S
TEEL
S
OFA
(I
F
S
O
E
QUIPPED
)
The J-steel sofa functions much the same as a
residential futon. To make the J-steel sofa in to
a bed, lift up on the bottom seat cushion and
pull it towards you. The sofa back will drop
down to provide a flat sleeping surface. For
additional comfort and to reduce fabric
damage, you may want to place a cover or air
mattress (customer supplied) over the J-steel
sofa when it is in the sleeping position.
B
OOTH
D
INETTE
(I
F
S
O
E
QUIPPED
)
The dinette is designed to seat up to four
adults. You can access the dinette bench
storage by removing all the cushions and lifting
the bottom seat supports. If the dinette bottom
seat support is screwed shut, it is to protect
factory-installed equipment that must have
proper ventilation (do not use that area for
storage). To reconvert back to a booth dinette,
reverse the process.
The booth dinette can be converted into a bed.
To convert, remove all the cushions from the
booth dinette. Lift the tabletop, remove the
detachable table legs and place the tabletop
on the ledges provided between the booth
dinette benches. Lay the seat back cushions
against the back of the booth dinette bench.
Lay the dinette seat bottom cushions in
between the seat back cushions. The area
where the cushions meet should be slightly
raised. Push the raised cushion ends down
gently. The cushions are designed to fit snugly.
Reverse this process when reconverting back
to the booth dinette.
All camping trailers (except the J/Trax) have a
hinged table extension on the main dinette
table only.
70
SECTION 8
CAMPING & OPERATING
CAUTION
Do not use dry cleaning fluid on this
bedding. Cleaning solvents may have a
deteriorating effect on the insulation of the
heating element.
WARNING
Ensure that the RV is level. Water leaks
and other problems could result if the
slideout is operated without leveling the
RV. Ensure there are no people or
obstructions blocking the path of the room
when it is moving. Keep away from the
sides when the room is in motion. Ensure
the slideout is in the closed position prior to
hooking the RV to the tow vehicle.
FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
CAUTION
Do not place excessive weight in the
slideout room. It can cause the slideout
room to malfunction and cause damage to
the slideout.