60
5.2
Device ID and Language
5.2.1 Device ID
When you use IR controller to operate DVR, you must use device ID to select DVR.
The default device ID of DVR is “88”. If there are more than one DVR in one place, please
define different device ID for each DVR. Otherwise, the IR controller will control all DVR
with the same device ID at the same time.
In “Display” menu, move “Active Frame” to the device ID edit box, in the edit status,
you can use numeric keys to input new device ID. The device ID value is ranged among
01-255.
After you finish the modi
fication, press “Confirm” button to save and take effect or
press “Cancel” to abort modification.
Summary of Contents for DS-8704HI-S
