Jaycar Electronics DS-8704HI-S User Manual Download

Page: 48 / 136

4.8

Turn off DVR

Note: Do not switch off the power directly in case of damaging HDD. The

correct step is using “Power Off” in the “Utilities” menu, or [

POWER

]

key on the

front panel or on IR controller.

Shut down DVR normally

Use menu

Ente

r into “Utilities” menu, move “Active Frame” to “Power Off” button and enter into

power off dialog, press “Confirm” to shut down the DVR.

Use

[POWER] key of front panel or IR controller

Press

[

POWER

]

key for above 3 seconds.

In preview mode, a login dialog will pop-up, select user name and input password,

press

[

Enter

]

to enter into power off dialog and press “Confirm” to shut down DVR. If you

input error password for three times, DVR will return preview mode.

Summary of Contents for DS-8704HI-S









































































































































Search results

Summary of Contents for DS-8704HI-S

Reviews:

Related manuals for DS-8704HI-S

Brands by name

Popular brands

Jaycar Electronics DS-8704HI-S, User Manual

Search results

Summary of Contents for DS-8704HI-S

Reviews:

Related manuals for DS-8704HI-S

Brands by name

Popular brands