Javad JLink LTE, User Manual

Page: 15 / 29

www.javad.com 15
Figure 20.
Advanced tab
4. Reboot the device by clicking Reboot in the
Administration/Management
tab.
Figure 21.
Administration Management tab
5. Setup the Router. In the Setup/Router tab select
the following parameters:
• “UHF Modem” as Source
• “Serial port“ as Destination.
• Click Save Settings and wait until finish.
Figure 22.
UHF Modem Router tab
6. Connect the Serial Port. Use any application to
connect serial port of JLink LTE with following param-
eters:
• Baudrate 115200
• Parity none
• Data Bits 8
• Stop Bits 1
• Handshake hardware