Description and Operation
GISmore Configuration
Configuring the GSM/GPRS Module
27
www.javad.com
Figure 15. Master/Slave tab
3. Click Apply, and then click File
Disconnect.
Configuring the GSM module for Internet access
Note:
To comply with RF exposure requirements, maintain at least 20 cm between the user and the GSM
modem.
1. On the General tab, set the following parameters (Table 6) and click Apply (Figure 16). In this tab
modem and service status and possible errors are displayed.
Table 6. Receiver Parameters for the General Tab
Parameter
Rover Receiver
Mode
GPRS
PIN
Enter a Personal Identification Number (PIN) if required.
