Description and Operation
Operation
Connecting the Receiver and a Computer
19
www.javad.com
4.5. Connecting the Receiver and a Computer
JAVAD GNSS NetView software provides an interface for various configuration, monitoring, and
management functions for the receiver. To configure, manage files, or maintain the receiver, connect the
receiver and a computer using Bluetooth and start NetView:
Once you have established a connection between the receiver and the computer/controller, you will be
able to configure the receiver and its components, send commands to the receiver, download files from
the receiver’s memory; as well as, upload new firmware, upload an OAF, and upload configuration files to
a receiver, using NetView.
The GISmore receiver contains Bluetooth
®
wireless technology that allows file transfer and
synchronization between the receiver and any other external device that supports Bluetooth
®
wireless
technology; for example, JAVAD GNSS Victor, an IPAQ, or a computer with USB-to-Bluetooth
®
adapter
or PCMCA-to-Bluetooth
®
adapter installed.
The GISmore and external device connection procedure varies slightly depending on the type of external
device used. In general, the connection procedure is as follows:
Note:
Refer to your Bluetooth
®
-enabled external device documentation for more detailed connection
information.
1. Turn on a Bluetooth
®
-enabled external device and your receiver. The default external device
mode is Master; the receiver’s Bluetooth
®
module mode is Slave.
2. Instruct the external device (Master) to search for the receiver (Slave).
3. Once the Master device detects the receiver, use the procedure described in the external device’s
documentation to connect it with the receiver.
4. Start NetView, select SER as type of connection mode, and specify the port the receiver is
connected to.
Figure 6. NetView - Connection via Bluetooth
