Description and Operation
GISmore Configuration
Configuring Receiver
24
www.javad.com
Figure 11. Ports tab
7. Open
Advanced
tab, and then
Multipath Reduction
subtab. Activate
Code multipath reduction
(
mpnew
) on base and rover for DGPS mode.
For RTK DGPS mode activate
Carrier multipath reduction
(
mpnew
) as well (Figure 12).
Figure 12. Multipath Reduction
8. Click
Apply
, to save the made changes and settings into receiver’s memory and close the dialog
window. The receiver configuration will be kept in the receiver till you will change them or will
clear NVRAM. For detailed description of settings and parameters see
NetView Software Manual
.
