Jasic EVO 2.0 ET-200PACDC, Owner'S Manual

Page: 39 / 80

39
OPERATION - TIG
Before starting any welding activity ensure that you have suitable eye protection and
protective clothing. Also take the necessary steps to protect any persons within the welding
area.
TIG DC operation steps
To select TIG mode by pressing the green welding mode selection button until the
(2nd to top) TIG DC LED is illuminated as shown far left, then ensure you have also
selected standard (pulse off) mode as also circled left.
Select the 2T torch trigger mode by pressing the
torch mode button until the 2T LED is Illuminated
as shown right (for alternative trigger modes
details, please see pages 50/51).
Now, select your TIG starting method of either HF or Lift TIG.
Start by pressing the HF/lift arc button until the desired TIG
start LED is illuminated as shown left.
To select pre flow gas time setting, rotate the adjustment dial
until the pre
- gas LED is lit, then press the dial and the LED will
then start to flash, by rotating the adjustment control dial
will adjust the pre flow time shown in the display window.
The pre flow adjustment range is 0 ~ 3 seconds.
To select the initial start current setting, rotate the adjustment
dial until the start amps LED is lit, then press the dial and the LED
will then start to flash, by rotating the adjustment control dial
will adjust the start amps shown in the display window.
The start current adjustment range is 5 ~ 200 amps (230v mode).
To select upslope time, rotate the adjustment dial until the
upslope time LED is lit, then press the dial and the LED will then
start to flash, by rotating the adjustment control dial will adjust
the upslope time shown in the display window.
The upslope time adjustment range is 0 ~ 10 seconds.
To select the required welding current setting, rotate the
adjustment dial until the peak amps LED is lit, then press the
dial and the LED will then start to flash, then rotating the
adjustment control dial will adjust the welding current shown
in the display window.
The welding current adjustment range is 10 ~ 200 amps (230v mode).