18
CONTROL PANEL
10.
Adjustment control knob/button: Pressing the control knob allows you to scroll through the
machines parameters and then on the selected parameter you can rotate the control knob which
allows you to adjust the selected parameter setting seen on the control panel digital display.
11.
The VRD indicator The VRD (Voltage Reduction Device) LED will be lit when the machine is in MMA
mode and the VRD function is enabled.
12.
MMA parameter selection zone: By pressing the adjustment switch you will have access to adjust
MMA parameters of MMA welding current, hot start and arc force control.
13.
TIG standard or TIG pulse function button: Pressing the pulse button enables the TIG current pulse
functions, see from page 22 for further details.
14.
AC waveform type selection switch: Pressing the AC wave button will allow you to scroll through 3
wave types used in TIG AC welding mode, the selections are square wave, triangle wave and sine
wave and depending on your selection the corresponding LED indicator will illuminate, see from
page 22 for further details.
Summary of Contents for EVO 2.0 ET-200PACDC
Page 1: ...1...
Page 73: ...73 UKCA Declaration of Conformity...
Page 74: ...74 EC DECLARATION OF CONFORMITY...
Page 80: ...80...
