Jasic EVO 2.0 ET-200PACDC, Owner'S Manual

Page: 20 / 80

20
CONTROL PANEL - AC FUNCTIONS (continued)
The TIG Parameter selection area as shown above shows the process flow when TIG welding.
Pushing the adjustment control dial will highlight the Ip indicator LED and then rotating the control dial
will scroll you through the other parameters in the selection area.
When in TIG pulse mode, the pulse frequency indicator will illuminate to indicate that
pulse frequency can be adjusted and between the values of 0.5 ~ 200Hz
(Available in AC or DC TIG welding mode).
When in TIG pulse mode, the pulse duty - cycle indicator will illuminate to indicate that
the ratio of the peak current time to pulse period can be adjusted between the values
of 10 ~ 90%. (Available in AC or DC TIG welding mode).
When in TIG AC mode, the AC frequency indicator will illuminate to indicate that AC
frequency can be adjusted and between the values of 20 ~ 250Hz.
(Available in AC TIG welding mode only).
When in TIG AC mode, the AC balance indicator will illuminate to indicate that AC
balance the ratio of tungsten anode time to the AC cycle which can be adjusted and
between the values of 20 ~ 60Hz.
(Available in AC TIG welding mode only).
When in TIG AC hybrid mode, the mixed frequency indicator will illuminate to indicate
that the mixed AC frequency can be adjusted and between the values of 20 ~ 250Hz.
(Available in AC TIG hybrid welding mode).
When in TIG AC hybrid mode, the mixes duty cycle indicator will illuminate to indicate
that the ratio of DC to the mixture period can be adjusted and between the values of
0.5 ~ 25Hz.
(Available in AC TIG hybrid welding mode).